Heavy-duty Pallet Forklift Mobile Robot with 96V Auto-Recharge System

TECHNICAL PARAMETERS ●Standard O Optional -Not available
Basic Parameters	Model No.		X3-PS80	X3-PS80-CG1200	X3-PS100	X3-PS100-CG800
	Load Capacity	kg	8000	8000	10000	10000
	Load Center Distance	c(mm)	600	600	400	400
	Weight(incl.battery)	kg	5800	7350	3750	3700
	Fork L×W×H	16es(mm)	120017580	1200/310	80017580	800/310
	Fork Outside Spacing	b5(mm)	400-1030		400-1030	一
	Fork Inside Spacing	b4(mm)	50-680		50-680	一
	Fork Tilt Angle(Down/Up)	a/β(°)	-	-	-	一
	Max.Lifting Height	h2(mm)	1500	1500	1500	1500
	Mast Lowered Height	h1(mm)	2628	2628	2628	2628
	Max.Height During Operation		2628	2628	2628	2628
	Max.Vehicle Height	h1'(mm)	2772	2772	2772	2772
	Overall Length (incl.forks)	1(mm)	2470	2400	2200	2200
	Body Width	b1(mm)	1720	1720	1720	1720
	Min.Ground Clearance	m2(mm)	35	35	35	35
	Min.Turning Radius	Wa(mm)	1990	1990	1990	1990
	Number of Wheels,Front/Rear(X=Drive Wheel)		1x/2	1x/2	1x/2	1x/2
	Tire Material		Polyurethane	Polyurethane	Polyurethane	Polyurethane
	Min.Safety Distance	a(mm)	200	200	200	200
	Aisle Width(800×1200 across fork,spin turn,mm)	Ast(mm)	-		3055	3055
	Aisle Width(1200×1200,spin turn,mm)		3055	3055	-	-
	Aisle Width(800×1200 across fork,R1500,mm)		5	-	3279	3279
	Aisle Width(1200×1200,R1500,mm)		3550	3470	-	-
	Charging Height	mm	428	428	428	428
Motion Performance	Drive Type		Steering Wheel	Steering Wheel	Steering Wheel	Steering Wheel
	Movement Mode		Forward/Backward,Cur	ved Turning,Spot Rotatio	n
	Travel Speed (Loaded/Unloaded)	m/s	1/2	1/2	1/2	1/2
	Max.Gradeability (Loaded/Unloaded)	%	5/8	5/8	5/8	5/8
	Positioning Accuracy	mm	±5	±5	±5	±5
	Angle Accuracy		±1	±1	±1	±1
	Lifting Speed (Loaded/Unloaded)	mm/s	110/180	110/180	110/180	110/180
	Lowering Speed(Loaded/Unloaded)	mm/s	Adjustable Ratio	Adjustable Ratio	Adjustable Ratio	Adjustable Ratio
	Lifting Height Accuracy	mm	±5	±5	±5	±5
	Wired Encoder		●	●	●	●
	Cylinder End Buffer		●	●	●	●
	Electronic Soft Lift/Lower		●	●	●	●
Battery Performance	Rated Voltageoltage	V	96	96	96	96
	Battery Capacityacity	Ah	302	302	302	302
	Battery Low-temp Heating		●	●	●	●
	Charging Cycles		Full Charge and Discharge≥3000 Times
	Operating Time(Rated Condition)	h	6-8	6-8	6-8	6-8
	Charging Time(15-90%)	h	1		1	1
	Charging Mode		Side Charging	Side Charging	Side Charging	Side Charging
Safety Protection	Front Single Laser Obstacle Detection			-	-	-
	Front Dual Laser Obstacle Detection		●	●	●	●
	Cargo Placement Detection		●	●	●	●
	Pallet Identification		●	●	●	●
	Weighing Module		○	○	○	○
	Driving Recorder		○	○	○	○
	Safety Bumper Detection		●	●	●	●
	Pallet In-position Detection		●	●	●	●
	Fork Tip Photoelectric Detection		●	●	●	●
	Top Anti-collision		○	○	○	○
	Left/Right E-stop		●	●	●	●
	Tri-color Light &Buzzer		●	●	●	●
Others	2D Laser SLAM Navigation		●	●	●	●
	3D Laser SLAM Navigation		○	○	○	○
	Visual SLAM Hybrid Navigation		○	○	○	○
	10"Display		●	●	●	●
	Steering Wheel Operation		-		-
	Wired Controller		○	○	○	○
	Mobile APP		●	●	●	●
	RFID Reader		○	○	○	○
	Working Noise	dB	≤75	≤75	≤75	≤75
The above data is sourced from the results obtained through testing by the XGEN Robot Test Team.

FAQs

What are the payload capacities and load center specifications available for the X3 series?

The X3 series is designed for ultra-heavy-duty industrial logistics, offering two main weight classes:

8-Ton Models (X3-PS80 / X3-PS80-CG1200): 8,000 kg load capacity at a 600 mm load center.
10-Ton Models (X3-PS100 / X3-PS100-CG800): 10,000 kg load capacity at a 400 mm load center.

What are the battery specifications and charging efficiency of this heavy-duty system?

The X3 series runs on a high-efficiency 96V / 302Ah industrial battery infrastructure. Under rated working conditions, it provides a solid 6 to 8 hours of continuous runtime. Utilizing its high-current side-charging mode, it can fast-charge from 15% to 90% in just 1 hour, minimizing fleet downtime.

What safety and intelligent detection features are standard on the X3 series?

The X3 series comes standard with a comprehensive safety and perception package, including:

Dual Laser Obstacle Detection & Safety Bumper Detection.
Pallet Identification & Pallet In-position Detection.
Cargo Placement Detection & Fork Tip Photoelectric Sensors.
Optional Add-ons: Integrated Weighing Module, Driving Recorder, Top Anti-collision sensor, and 3D Laser SLAM.